Fujian Zhenghe Huada Bamboo and Wood Co., Ltd.
Custom Bamboo & Wood Components and CNC Machining
Custom bamboo and wooden components with routed pockets, slots, holes and shaped profiles. Send your drawing, dimensions, material and quantity for a quotation.
OEM PROJECT REVIEW
Custom Bamboo & Wood Components and CNC Machining
Custom bamboo and wooden components can be evaluated with routed pockets, slots, holes and shaped profiles. Send your drawing, dimensions, material, required delivery stage and quantity for a quotation.
CNC-machined bamboo component case
Feature geometry illustration
Describe the machining features
Size and profile
Provide the blank size, material thickness and required finished outline for cutting and forming.
CNC routing and pockets
Provide each recess length, width, depth and required corner shape for routed outlines and pocket milling.
Slots and holes
Mark every slot and hole position, width or diameter, depth, and whether it passes through the part.
Edges and combined features
Show rounded edges, chamfers and combinations of holes, slots or recesses on the same part.
Design review boundaries
Feasibility and quotation depend on the drawing, material and thickness, recess depth, remaining wall thickness, internal radii, tool access, finish and quantity. HUADA confirms tolerances, fit and the production route for each project rather than applying one limit to every geometry.
Application directions
Gift-set display bases; locating bases for bottles, jars or accessories; slotted desktop organiser parts; bamboo or wood inserts for display and packaging; and branded product components can be reviewed against the intended fit, load and end use.
Define the semi-finished delivery stage
Specify delivery after cutting or forming, after defined sanding, or with an agreed oil or coating. Also state the next manufacturing step and transport protection; the sample confirms the natural colour and grain range and the agreed finish.
What to send for a quotation
- Drawing, dimensioned sketch, photos or a physical sample.
- Required material and colour, including an acceptable natural variation range.
- Overall size, thickness, groove and hole dimensions, depths and critical fit requirements.
- The exact semi-finished delivery stage and any subsequent work you will perform.
- Sanding, oil or coating requirements.
- Quantity per design, packaging and destination.
Sample, tooling or setup costs, MOQ and lead time are quoted for the design and quantity.
Procurement questions
Can you make bamboo or wood parts with custom recesses?
Send a drawing, dimensioned photo or sample. HUADA will review the material, feature geometry and machining sequence before quoting.
Can I request unfinished or unoiled parts?
Yes. State whether you need the part after cutting or forming, after specified sanding, or before the final oil or coating.
Which groove and hole dimensions should I provide?
Provide the overall size and thickness, positions from a reference edge, lengths, widths or diameters, depths, and any critical fit. Mark blind recesses and through-holes separately.
Why can an internal corner be rounded?
A rotating round cutter normally leaves a radius in an internal corner. If another part must fit, show its shape and the required clearance so the corner design can be reviewed.
What should I approve on the sample?
Check the agreed material and natural colour range, edges, surface preparation, feature positions and fit with any mating parts.
How are semi-finished parts quoted?
Pricing depends on material, machining steps, finish, quantity and packing. Sample, tooling or setup costs, MOQ and lead time are quoted for the specific design.